The XLERATOR is the number-one hand dryer in the world and the new industry standard for restroom efficiency and sustainability.


  • 10 second Dry Time*
  • 80% Less Energy Than Conventional Hand Dryers
  • 95% Cost Savings Vs. Paper Towels
  • Made In USA Certified®
  • 5-Year Limited Warranty
  • GREENSPEC® Listed and Helps Qualify for several LEED® credits
  • A Hygienic Hand Drying Solution
  • Over a Decade of Proven Performance
  • Virtually Maintenance Free


The XLERATOReco is the most energy-efficient, environmentally friendly hand dryer on the planet.

  • No Heat Technology
  • 12 Second Dry Time*
  • 500 Watts
  • Adjustable Speed and Sound Control
  • Can Install Multiple XLERATOReco Units On One Circuit
  • 95% Cost Savings Vs. Paper Towels
  • 5-Year Limited Warranty
  • Made In USA Certified®
  • GreenSpec® Listed and Helps Qualify for several LEED® v4 c redits
  • Virtually Maintenance Free

Customize Your Dryer

The XLERATOR® electric hand dryer offers exclusive, state-of-the-art accessories and add-ons, including ADA compliant recess kits and Xchanger kits, as well as the new 500 watt XLERATOReco option. The XLERATOR also offers exclusive digital imaging technology that allows buyers to design their own high-speed XLERATOR® hand dryers with company logos, team mascots, school colors and more.


XLERATOR® XChanger® Kit


Part ID Description Download PDF
40550 XChanger Kit PDF
40551 ADA Height XChanger Kit
40575 XChanger Combo Kit: Comes with ADA Recess Kit #40502 and Standard XChanger #40550
40576 ADA XChanger Combo Kit: Comes with ADA Recess Kit #40502 and ADA Height XChanger #40551

Anti-Microbial Wall Guards


Part ID Description Download PDF
89W Wall Guard White PDF
89B Wall Guard Black
89S Wall Guard Stainless

ADA Compliant Recess Kit

Part ID Description Download PDF
40502 ADA Compliant Recess Kit PDF

Noise Reduction Nozzle

Part ID Description Download PDF
62.2 1.1 Nozzle PDF

Speed and Sound Control
Speed and Sound

40113Motor Speed Controller 208/240 V

Part ID Description Download PDF
40112 Motor Speed Controller 110/120 V PDF




Width 11 3/4″ (298 mm) Height 12 11/16″ (322 mm) Depth 6 11/16″ (170 mm)

XL-BW: 15 lbs. (6.8 kgs.) XL-SB: 16 lbs. (7.26 kgs.) XL-W, GR, C, SI, SP: 17 lbs. (7.71 kgs.)

A. All covers will be fastened to a base plate by two chrome plated tamper-proof bolts. Cover shall be one of the following:

Die-cast zinc alloy – One-piece, heavy-duty, rib-reinforced, lightweight, unbreakable, rustproof and all exposed surfaces shall be bright chrome plated or finished with chip-proof, electrostatically applied epoxy paint.

Bulk Molding Compound (BMC) – White reinforced thermoset resin.

Stainless Steel – with a brushed finish.

Special Image – Digital image applied to die-cast or stainless steel covers using patented Kolorfusion Sublimation Decoration process.

B. Base plate shall be equipped with (3) 7/8″ (22 mm) diameter holes, the bottom one is suitable for use with surface conduit.

C. All internal parts shall be coated according to Underwriters’ Laboratories, Inc. requirements.

D. Entire mechanism shall be internally grounded.

E. Options
HEPA Filtration System: Filters 99.97% of bacteria at 0.3 microns from the air stream.
1.1 Noise Reduction Nozzle: Lowers decibel level 9 dB by reducing air deflection noise but increases dry time by approximately 3 seconds.

F. Accessories (optional)
Microban® Antimicrobial Wall Guards: 89W (White), 89B (Black), 89S (Stainless)
XChanger Paper Towel Retrofit Kit: 40550, 40551 (ADA Height)
ADA Recess Kit: 40502

A. Motor shall be a thermally protected, series commutated, through-flow discharge vacuum motor/blower (5/8 hp / 20,000 rpm) which provides air velocity of up to 19,000 LFM (linear feet per minute) at the air outlet and 16,000 LFM at the hands (4 inches [102 mm] below air outlet).

B. Heating element (970 w) is constructed of Nichrome wire and mounted inside the blower housing, thereby being vandal resistant. It shall be protected by an automatic resetting thermostat, which shall open whenever air flow is cut off and shall close when flow of air is resumed. It shall produce an air temperature of up to 135°F (57°C) at a 72°F (22°C) ambient room temperature at the hands (4 inches [102 mm] below air outlet).

C. Control assembly is activated by an infrared optical sensor located next to the air outlet. The dryer shall operate as long as hands are under the air outlet. Control includes a speed and sound control mechanism, variable heat control with High, Medium, Low and Off settings and a filter sensor which is activated should the filter become clogged. There is a 35-second lockout feature if hands are not removed. Sensor equipped with externally visible Red LED light that flashes error codes to assist in troubleshooting.

The dryer shall be guaranteed to be free from defects for a period of five (5) years. Warranty shall include labor performed at factory as well as the repair or exchange of defective parts, at manufacturer’s option.
One dryer for every two washbasins is sufficient for most applications. If restroom traffic is unusually heavy, we suggest one dryer per washbasin in small installations and two dryers for every three washbasins in larger installations. When a 54″ washfountain is used, we suggest four to five dryers.


Model No. Cover Finish
XL-W White Zinc Die-cast
XL-BW White Thermoset (BMC)
XL-GR Graphite
XL-C Chrome
XL-SB Brushed Stainless Steel
XL-SI Custom Special Image
XL-SP Special Paint


Automatic Sensor Operated


Surface Mounted



110-120V 11.3-12.2A 1240-1450W 4.3-4.5A 460-530W 50/60 Hz
208-277V 5.6-6.2A 1160-1490W 2.0-2.2A 425-500W 50/60 Hz
230V 6.1A 1410W 2.2A 500W 50 Hz



110-120V 4.3-4.5A 460-530W 50/60 Hz
208-277V 2-2.2A 425-500W 50/60 Hz
230V 2.2A 500W 50 Hz


Suggested Mounting Heights

from floor to bottom of dryer:

Men 45″ (114 cm)
Women 43″ (109 cm)
Teenagers 41″ (104 cm)
Children 35″ (89 cm)
Handicapped 37″ (94 cm)
Contact Us

Want to know more or how to buy?

Contact us and we'll send you everything you need to know

Contact Us